Accessories


Hand-Held TDS Meter

Hand-Held TDS Meter
Click to view larger image

A simple and affordable pocket tester for TDS measurements. Measurements are automatically compensated for temperature variations, thanks to an internal temperature sensor. Calibration can be performed and batteries can be easily replaced. Unit comes supplied with protective cap, calibration screwdriver, batteries and instructions.

Part Number:OTG2-DI-TDS
Size:15.5 x 3.1 x 2.3cm (6.1 x 1.25 x 1 inches)
Weight:56.7g (2 oz)
Range:0 - 9990 ppm (mg/L)
Resolution:0-999: 1 ppm; 1000-9990: 10 ppm (indicated by a 'x10' icon)
Accuracy:+/- 3%
Calibration:Manual
Calculation Solution:342 ppm NaCl solution
Temperature Compensation:Automatic
Battery Type:2 x 1.5V button cell batteries (included) (LR44 or equivalent)
Instructions:Included (Operating, Calibration, and Battery Replacement)
MSRP:$ 25.95
Discount:$ 14.99
Add To Cart

Back To Top

Replacement Head

Replacement Head
Click to view larger image

Part Number:OTG-038
MSRP:$ 59.95
Discount:$ 49.95
Add To Cart

Back To Top

High Flow Shut off Valve

High Flow Shut off Valve
Click to view larger image

Part Number:OTG-024
Size:3/4 in diameter
Description:High Flow Shut off Valve
Materials:Plastic
MSRP:$ 3.00
Discount:$ 2.50
Add To Cart

Back To Top

Adapter Accessory Kit

Adapter Accessory Kit
Click to view larger image

Back Flush, High Flow Shut Off Valve, Inlet Adapter, Outlet Adapter, Outlet Cap, Inlet Plug

Part Number:OTG-035
Description:Adapter Accessory Kit
Materials:Plastic
MSRP:$ 12.95
Discount:$ 8.95
Add To Cart

Back To Top

Rope Handle

Rope Handle
Click to view larger image

Free Shipping

Part Number:OTG-009A
MSRP:$ 6.00
Discount:$ 5.50
Add To Cart

Back To Top

High Pressure Drinking Hose

High Pressure Drinking Hose
Click to view larger image

Fresh water, 4', high pressure hose eliminates the need to use the traditional longer hose. Non-toxic drinking water safe, made from FDA-approved materials. The 4' hose allows the user to keep his water softener or water deionizer at arm's length.

Part Number:OTG-013
Size:4ft, 1/2 in diameter
Application:Short hose
Description:High Pressure Drinking Hose
Pressure:160 PSI
Materials:FDA listed materials
Engineered:High pressure soft and deionizer water hook-ups
Condition:Taste-free and non-toxic
MSRP:$ 9.95
Discount:$ 6.95
Add To Cart

Back To Top

Distribution Head and Cap O-Ring

Distribution Head and Cap O-Ring
Click to view larger image

O-ring for the distribution head and cap with a silicone lubricant packet.

Part Number:OTG-031B
MSRP:$ 10.00
Discount:$ 8.50
Add To Cart

Back To Top

Deionizer Bypass Kit

Deionizer Bypass Kit
Click to view larger image

The add on cam lever couplings control the water flow through the deionizer. The on-off valves allow you to bypass the deionizer when it is not needed, which helps to prolong the life of the resin. The kit connects to the existing inlet and outlet, and includes all the necessary equipment to bypass the deionizer when needed, and ultimately extend the life of your deionizer. 

Part Number:OTG-044
MSRP:$ 75.00
Discount:$ 49.99
Add To Cart

Back To Top

In-Line Quick Check TDS/Conductivity Meter

In-Line Quick Check TDS/Conductivity Meter
Click to view larger image

FEATURES

-Tests for TDS or conductivity levels.
-Eight programmable set points (by dip switch).
-Factory Calibrated to 100 ppm NaCl. Re-calibration is unncessary.
-Excellent Reverse Osmosis (RO) or Deionization (DI) monior.
 
Connect the meter to the outlet of the DI and push the button, the unit displays a green or red light, indicating good water quality or service required, respectively.
 
Contact us for a digital readout model with a range from 0-9990 ppm.

Part Number:OTG-DI-002TDSKIT
Range:0-5000 ppm (10,000 µS)
Accuracy:±3%
Battery Type:4 x 1.5V button cell batteries (389-A) (included)
MSRP:$ 120.00
Discount:$ 109.99
Add To Cart

Back To Top

Post Lite Indicator Kit

Post Lite Indicator Kit
Click to view larger image

Add a post lite indicator kit to your deionizer station for continuous monitoring of the quality of the deionized water being produced. The monitoring is simple; the green lite indicates the water conductivity is below the threshold value; the red light warns that it is above. You can use your digital pocket TDS tester [range 0-999 ppm] for the exact level if required from time to time. The patented square wave indicator is a economical method of monitoring water quality via conductivity. The solid state circuitry utilizes a symmetrical square wave sampling voltage to eliminate plating and extend electrode life.

Part Number:#OTG-DI-003 P LITE
Weight:200 gm
Accuracy:+/- 15%
Available Thresholds:5K to 2 Meg ohms/cm (Must select threshold - typical levels are 5, 20, 50, 100)
Housing Material:ABS black
Electrode Material:Tungsten
Supply Voltage:120 VAC
Output Voltage:9 VDC
Cord Length:9 ft
Maximum Temperature:100F
MSRP:$ 158.50
Discount:$ 142.65
Add To Cart

Back To Top

Mixed Bed to Dual Bed Conversion Kit

Mixed Bed to Dual Bed Conversion Kit
Click to view larger image

Do you want to cut your operating costs by 50% and produce 2 ½ times the amount of water compared to your current Mixed Bed single tank deionizer? Why not convert your single tank unit to a dual tank with the On The Go® conversion kit.

The kit contains a new cation tank filled with virgin cation resin, enough anion resin to charge the tank you have on hand, and all the cam-lock connectors and caps to finish the job. The conversion will take just minutes and the new set up will provide you with plenty of water to get the job done. The conversion kit is also available to convert to the tri-bed unit. Call for details.

Part Number:#OTG-SDI/DDI Conversion Kit
Size:22" x 6.75" each, any size
Capacity:0.25 cubic feet
*Rinses:Information Available
View our capability table for more information
Warranty:1 year limited warranty
Connector:Included
Application:Dual Bed Design
Description:Mixed Bed Conversion Kit
Model:Standard Model
Details:Call our customer service toll-free at 1-866-482-9614
MSRP:$ 280.00
Discount:$ 266.00
Add To Cart

Back To Top

Pre-Carbon Blk Cartridge Kit - 10" x 2.5"

Pre-Carbon Blk Cartridge Kit - 10" x 2.5"
Click to view larger image

Perfect for reduction of unwanted tastes and odors for all water softener applications, and a great job of protecting your deionizer by reducing chlorine and total organic compounds from the water source.

"Ten Micron 10" Carbon Block Made With Coconut Shell Carbon"

Ideal for improving the taste and odor of the water for your RV application and reducing chlorine and total organic compounds to increase the life of your deionizer. Small and compact as well as easy installation!

An ideal, yet inexpensive choice for deionizer or softener pre cartridge requirements: Agricultural, Photographic, Residential and many Industrial manufacturing processes.

The filter housing is manufactured from the highest quality, FDA grade, 100% polypropylene. Leak-proof sealing is accomplished by compression against a top-seated EPDM O-ring located int eh housing sump. Thick wall and added ribs make the housings ideal for a wide range of applications. Housing comes equipped with a pressure release valve. Rated for temperatures to 125 F and pressures to 125 PSI.

The kit comes complete with a 10" housing, 10 micron carbon block cartridges [3 ea], 4' high pressure white hose, hi-flow shut-off valve, housing wrench, wall bracket and inlet/outlet hose adapters.

Part Number:#OTG-CARBLK-PRE FILT10-2.5
Design:Polypropylene Housing
Size:10" x 2.5"
FlowRate:2 GPM
Pressure:125 PSI
Details:Call our customer service toll-free at 1-866-482-9614
Kit:Complete Kit
Temperature:125F
Cartridge:Coconut Shell Carbon
MSRP:$ 124.50
Discount:$ 112.05
Add To Cart

Back To Top

Pre-Carbon Blk Cartridge Filters - 10" x 2.5"

Pre-Carbon Blk Cartridge Filters - 10" x 2.5"
Click to view larger image

Perfect for reduction of unwanted tastes and odors for all water softener applications, and a great job of protecting your deionizer by reducing chlorine and total organic compounds from the water source.

"Ten Micron 10" Carbon Block Made with Coconut Shell Carbon"

These are ideal for improving the taste and odor of water for your RV application as well as reducing chlorine and total organic compounds that will protect/increase the life of your deionizer.

Very inexpensive choice for application with your deionizer or softener to achieve pre cartridge requirements in all applications, including: Agricultural, Photographic, Residential, and many Industrial manufacturing processes.
 

EASY CHANGEOUT!

Part Number:#OTG-CGAC10-2.5
Design:Polypropylene
Size:Standard 10" Housing-Ridge Cap
Weight:3 lbs
FlowRate:2 GPM
Details:Call our customer service toll-free at 1-866-482-9614
Temperature:125F
Cartridge:Coconut Shell Carbon
Units:6 units per package
MSRP:$ 86.14
Discount:$ 77.55
Add To Cart

Back To Top

Post-Sediment Cartridge Kit - 10" x 2.5"

Post-Sediment Cartridge Kit - 10" x 2.5"
Click to view larger image

Perfect to control residual solid by adding...

Five Micron 10" Graded Density Melt Blown Polypropylene Filter"

The standard 10" five micron post-sediment filter kit...

"Can be added to either your deionizer or softener"

These cartridges are manufactured from a durable spun polypropylene cord and are available with nominal 5 micron rating. This unit is ideal for aggressive chemicals and general filtration requirements when depth filtration is required. Each cartridge is individually shrink-wrapped.

This filter is designed for the removal of dirt, rust, and sediment from water. Applications include: fine sediment removal of sand, silt, scale, unseen sludge, and rust particles is necessary.

Very inexpensive choice for application with your deionizer or softener to achieve post cartridge requirements in all applications including: Agricultural, Photographic, Residential, and many Industrial manufacturing processes.

Cartridges rated for temperatures up to 125 F. Cartridges are a polypropylene construction for excellent chemical resistance. No binders, additives, or lubricants to leach into the water. Maximum flow of 3-4 GPM max flow and 9 7/8" X 2 1/2" OD in size.

The filter housing is manufactured from the highest quality, FDA grade, 100% polypropylene. Leak-proof sealing is accomplished by compression against a top-seated EPDM O-ring located in the housing sump. Thick wall and added ribs make the housings ideal for a wide range of applications. Housing comes equipped with a pressure release valve. The unit is rated for temperatures to 125 F and 125 PSI.

The kit comes complete with a 10" housing, 5 micron sediment cartridges [3 ea], 4' high pressure white hose, hi-flow shut-off valve, housing wrench, wall bracket, and inlet/outlet hose adapters.

Part Number:#OTG-CSEDI-POST FILT
Design:Polypropylene Housing
Size:9.875" x 2.5"
FlowRate:3-4 GPM max flow
Pressure:125 PSI
Details:Call our customer service toll-free at 1-866-482-9614
Kit:Complete Kit
Temperature:125F
Cartridge:Durable Spun Polypropylene Cord
MSRP:$ 85.75
Discount:$ 77.25
Add To Cart

Back To Top

Post-Sediment Cartridge Filters - 10" x 2.5"

Post-Sediment Cartridge Filters - 10" x 2.5"
Click to view larger image

Perfect to control residual solids by adding...

Five Micron 10" Graded Density Melt Blown Polypropylene Filter"

The standard 10" five micron post-sediment filter kit... 

"Can be added to either your deionizer or softener"

These cartridges are manufactured from a durable spun polypropylene cord and are available with nominal 5 micron rating. This unit is ideal for aggressive chemicals and general filtration requirements when depth filtration is required. Each cartridge is individually shrink-wrapped.

This filter is designed for the removal of dirt, rust, and sediment from water. Applications include: fine sediment removal of sand, silt, scale, unseen sludge, and rust particles is necessary.

Very inexpensive choice for application with your deionizer or softener to achieve post cartridge requirements in all applications including: Agricultural, Photographic, Residential, and many Industrial manufacturing processes.

Cartridges rated for temperatures up to 125 F. Cartridges are a polypropylene construction for excellent chemical resistance. No binders, additives, or lubricants to leach into the water. Maximum flow of 5 GPM max flow and 9 7/8" X 2 1/2" OD in size.

Part Number:#OTG-CSC-5
Design:Polypropylene
Size:Standard 10" Housing-Ridge Cap
Weight:3 lbs
FlowRate:3-4 GPM max flow
Details:Call our customer service toll-free at 1-866-482-9614
Temperature:125F
Cartridge:Gradient Density Melt Brown
Units:6 units per package
MSRP:$ 27.00
Discount:$ 24.30
Add To Cart

Back To Top

Post-Sediment Cartridge Kit - 20" x 2.5"

Post-Sediment Cartridge Kit - 20" x 2.5"
Click to view larger image

Perfect to control residual solid by adding...

Five Micron 20" Graded Density Melt Blown Polypropylene Filter"

The standard 20" 5 micron post-sediment filter kit...

"Can be added to either your deionizer or softener"

These cartridges are manufactured from a durable spun polypropylene cord and are available with nominal 5 micron rating. This unit is ideal for aggressive chemicals and general filtration requirements when depth filtration is required. Each cartridge is individually shrink-wrapped.

This filter is designed for the removal of dirt, rust, and sediment from water. Applications include: fine sediment removal of sand, silt, scale, unseen sludge, and rust particles is necessary.

Very inexpensive choice for application with your deionizer or softener to achieve post cartridge requirements in all applications including: Agricultural, Photographic, Residential, and many Industrial manufacturing processes.

Cartridges rated for temperatures up to 125 F. Cartridges are a polypropylene construction for excellent chemical resistance. No binders, additives, or lubricants to leach into the water. Maximum flow of 3-4 GPM max flow rate.

The filter housing is manufactured from the highest quality, FDA grade, 100% polypropylene. Leak-proof sealing is accomplished by compression against a top-seated EPDM O-ring located in the housing sump. Thick wall and added ribs make the housings ideal for a wide range of applications. Housing comes equipped with a pressure release valve. The unit is rated for temperatures to 125 F and 125 PSI.

The kit comes complete with a 20" housing, 20 micron sediment cartridges [3 ea], 4' high pressure white hose, hi-flow shut-off valve, housing wrench, wall bracket, and inlet/outlet hose adapters.

Part Number:OTG-CSEDI-20X2.5
Design:Polypropylene Housing
FlowRate:3-4 GPM max flow
Pressure:125 PSI
Details:Call our customer service toll-free at 1-866-482-9614
Kit:Complete Kit
Temperature:125F
Cartridge:Durable Spun Polypropylene Cord
MSRP:$ 317.00
Discount:$ 285.00
Add To Cart

Back To Top

Post-Sediment Cartridge Filters - 20" x 2.5"

Post-Sediment Cartridge Filters - 20" x 2.5"
Click to view larger image

Perfect to control residual solids by adding...

Five Micron 20" Graded Density Melt Blown Polypropylene Filter"

The standard 20" 5 micron post-sediment filter kit... 

"Can be added to either your deionizer or softener"

These cartridges are manufactured from a durable spun polypropylene cord and are available with nominal 5 micron rating. This unit is ideal for aggressive chemicals and general filtration requirements when depth filtration is required. Each cartridge is individually shrink-wrapped.

This filter is designed for the removal of dirt, rust, and sediment from water. Applications include: fine sediment removal of sand, silt, scale, unseen sludge, and rust particles is necessary.

Very inexpensive choice for application with your deionizer or softener to achieve post cartridge requirements in all applications including: Agricultural, Photographic, Residential, and many Industrial manufacturing processes.

Cartridges rated for temperatures up to 125 F. Cartridges are a polypropylene construction for excellent chemical resistance. No binders, additives, or lubricants to leach into the water. Maximum flow of 3-4 GPM max flow rate.

Part Number:OTG-CSC20-5
Design:Polypropylene
Size:Standard 20" Housing-Ridge Cap
Weight:3 lbs
FlowRate:3-4 GPM max flow
Details:Call our customer service toll-free at 1-866-482-9614
Temperature:125F
Cartridge:Gradient Density Melt Brown
Units:6
MSRP:$ 282.45
Discount:$ 254.21
Add To Cart

Back To Top

Pre-Carbon Blk Cartridge Kit - 20" x 4.5"

Pre-Carbon Blk Cartridge Kit - 20" x 4.5"
Click to view larger image

Perfect for reduction of unwanted tastes and odors for all water softener applications, and a great job of protecting your deionizer by reducing chlorine and total organic compounds from the water source.

"Ten Micron 20" Carbon Block Made With Coconut Shell Carbon"

Ideal for improving the taste and odor of the water for your RV application and reducing chlorine and total organic compounds to increase the life of your deionizer. Small and compact as well as easy installation!

An ideal, yet inexpensive choice for deionizer or softener pre cartridge requirements: Agricultural, Photographic, Residential and many Industrial manufacturing processes.

The filter housing is manufactured from the highest quality, FDA grade, 100% polypropylene. Leak-proof sealing is accomplished by compression against a top-seated EPDM O-ring located int eh housing sump. Thick wall and added ribs make the housings ideal for a wide range of applications. Housing comes equipped with a pressure release valve. Rated for temperatures to 125 F and pressures to 125 PSI.

The kit comes complete with a 20" housing, 10 micron carbon block cartridges [3 ea], 4' high pressure white hose, hi-flow shut-off valve, housing wrench, wall bracket and inlet/outlet hose adapters.

Part Number:#OTG-CARBLK-PRE FILT20-4.5
Design:Polypropylene Housing
Size:20" x 4.5"
FlowRate:6 GPM max flow
Pressure:125 PSI
Details:Call our customer service toll-free at 1-866-482-9614
Kit:Complete Kit
Temperature:125F
Cartridge:Coconut Shell Carbon
MSRP:$ 202.50
Discount:$ 182.15
Add To Cart

Back To Top

Pre-Carbon Blk Cartridge Filters - 20" x 4.5"

Pre-Carbon Blk Cartridge Filters - 20" x 4.5"
Click to view larger image

Perfect for reduction of unwanted tastes and odors for all water softener applications, and a great job of protecting your deionizer by reducing chlorine and total organic compounds from the water source.

"Ten Micron 20" Carbon Block Made with Coconut Shell Carbon"

These are ideal for improving the taste and odor of water for your RV application as well as reducing chlorine and total organic compounds that will protect/increase the life of your deionizer.

Very inexpensive choice for application with your deionizer or softener to achieve pre cartridge requirements in all applications, including: Agricultural, Photographic, Residential, and many Industrial manufacturing processes.
 

EASY CHANGEOUT!

Part Number:#OTG-CGAC20-4.5
Design:Polypropylene
Size:Standard 20" Housing-Ridge Cap
Weight:3 lbs
FlowRate:6 GPM max flow
Details:Call our customer service toll-free at 1-866-482-9614
Temperature:125F
Cartridge:Coconut Shell Carbon
Units:6 units per package
MSRP:$ 201.75
Discount:$ 175.25
Add To Cart

Back To Top

Coming Soon...

Nozzle

Back To Top

**NOTE:

Back To Top