Deionizers

On The Go® Mixed Bed Deionizers, Dual Bed Deionizers, and Tri-Bed Deionizers all come with a 4' high pressure hose, hand-held TDS (Total Dissolved Solids) meter, shut-off valve, and cap/plug for the inlet/outlet. We use only high grade virgin resins and all of our systems come in standard and business models.


Mixed Bed Deionizer Standard Model

Mixed Bed Deionizer Standard Model
Click to view larger image

Compact and lightweight at only 18 pounds, this deionizer measures 6 ¾" in diameter by 22" in height. The unit contains ¼ cubic feet of high grade virgin mixed bed resin. This unit is easy to hook up or remove depending on your application. Works great in the garage, laboratory, on the road or anywhere you need deionized (DI) water. Unit comes complete with the deionizer, 4' high pressure hose, hand-held TDS meter, shut-off valve, and a cap/plug for the inlet/outlet.

Part Number:OTG2-SDI
Design:Mixed Bed System
Size:22" x 6.75"
Weight:18 lbs
Capacity:0.25 cubic feet
Tank:Single
*Rinses:Approximate # of rinses before refilling, assuming TDS of 250 PPM: Car - 36, RV Class A - 6
View our capability table for more information
Warranty:1 Year Limited Warranty
Meter:Portable TDS Hand-held Meter
FlowRate:Less than 2 gallons/minute for best performance & effectiveness
MSRP:$ 319.00
Discount:$ 299.00
Add To Cart

Back To Top

Mixed Bed Deionizer Business Model

Mixed Bed Deionizer Business Model
Click to view larger image

This system is perfect for the large volume detailer or for any manufacturing process. The large 6 ¾" by 48" tank holds approximately one cubic foot of high grade virgin mixed bed resin. The system needs floor space of only 10" by 10". The single tank business unit is easy to mount in an enclosed van or leave it in the garage to fill your holding tanks or wash your vehicles. Unit comes complete with the deionizer, 4' high pressure hose, hand-held TDS meter, shut-off valve, and a cap/plug for the inlet/outlet.

Part Number:OTG2-SDIL
Design:Mixed Bed System
Size:48" x 6.75"
Weight:52 lbs
Capacity:0.90 cubic feet
Tank:Single
*Rinses:Approximate # of rinses before refilling, assuming TDS of 250 PPM: Car - 136; RV Class A - 23
View our capability table for more information
Warranty:1 Year Limited Warranty
Meter:Portable TDS Hand-held Meter
FlowRate:Less than 5-6 gallons/minute for best performance & effectiveness
MSRP:$ 675.00
Discount:$ 660.00
Add To Cart

Back To Top

Dual Bed Deionizer Standard Model

Dual Bed Deionizer Standard Model
Click to view larger image

The unit is made up of dual tanks using two difference premium resin products. The first tank in the series contains ¼ cubic feet of cation resin and the second tank contains ¼ cubic feet of anion resin. When running these tanks in series you produce approximately 2 ½ times more water and will reduce your operating cost by 50% compared to the single tank mixed bed deionizer. The dual tank will save you money and give you a great return on your investment. The dual tank model comes with all the necessary fittings including a polypropylene cam lever for easy hook-up and only needs a 10" by 20" compact area. Unit weighs a mere 36 pounds. Unit comes complete with the deionizers, 4' high pressure hose, hand-held TDS meter, shut-off valve, and a cap/plug for the inlet/outlet.

Part Number:OTG2-DDI
Design:Dual Bed System
Size:22" x 6.75" each
Weight:18 lbs each
Capacity:0.25 cubic feet
Tank:Dual Tank
*Rinses:Approximate # of rinses before refilling, assuming TDS of 250 PPM: Car - 92; RV Class A - 15
View our capability table for more information
Warranty:1 Year Limited Warranty
Meter:Portable TDS Hand-held Meter
FlowRate:Less than 2 gallons/minute for best performance & effectiveness
Connector:Polypropylene Cam Lever
MSRP:$ 585.00
Discount:$ 545.00
Add To Cart

Back To Top

Dual Bed Deionizer Business Model

Dual Bed Deionizer Business Model
Click to view larger image

If you desire a larger capacity, more time between refills and lower cost per gallon, this is the system for you. The system is made up of two approximately one cubic foot tanks using premium dual bed resin products. The first tank contains virgin cation resin and the second tank contains virgin anion resin. Installed in sequence this unit will produce about 250% more water than the single tank business model and more value for your money. This unit is perfect for the manufacturer, window cleaner, or car detailer. Minimal floor space is needed for installation and use. The Dual Bed Business model comes with all the necessary fittings including a polypropylene cam lever for easy hook-up. The DI system comes complete with the deionizers, 4' high pressure hose, hand-held TDS meter, shut-off valve, and a cap/plug for the inlet/outlet.

Part Number:OTG2-DDIL
Design:Dual Bed System
Size:48" x 6.75" each
Weight:52 lbs each
Capacity:0.90 cubic feet
Tank:Dual Tank
*Rinses:Approximate # of rinses before refilling, assuming TDS of 250 PPM: Car - 345; RV Class A - 58
View our capability table for more information
Warranty:1 Year Limited Warranty
Meter:Portable TDS Hand-held Meter
FlowRate:Less than 5-6 gallons/minute for best performance & effectiveness
Connector:Polypropylene Cam Lever
MSRP:$ 1,025.00
Discount:$ 950.00
Add To Cart

Back To Top

Tri-Bed Deionizer Standard Model

Tri-Bed Deionizer Standard Model
Click to view larger image

This system was designed for a user requiring large quantities of pure water with limited space thus demanding the system to be extremely portable and compact. The fact that the system will also produce DI water at the lowest cost per gallon provides an additional benefit related to return on investment and ongoing operating cost. Made up of one ¼ cubic foot tank of virgin cation resin and two ¼ cubic foot tanks of virgin anion resin this deionizer will produce approximately 2 times the amount of water as the dual tank deionizer. Stage 1 is the cation tank and stages 2 and 3 are anion tanks. This system needs an area of 30" wide by 22" high by 10" deep for hook-up. At 54 pounds, moving the unit is no problem. Comes complete with the deionizer, 4' high pressure hose, hand-held TDS meter, shut-off valve, and a cap/plug for the inlet/outlet.

Part Number:OTG2-TDI
Design:Tri-Bed System
Size:22" x 6.75" each
Weight:18 lbs each
Capacity:0.25 cubic feet
Tank:Tri-Tank
*Rinses:Approximate # of rinses before recharging, assuming TDS of 250 PPM: Car - 185; RV Class A - 30
View our capability table for more information
Warranty:1 Year Limited Warranty
Meter:Portable TDS Hand-held Meter
FlowRate:Less than 2 gallons/minute for best performance & effectiveness
Connector:Polypropylene Cam Lever
MSRP:$ 942.00
Discount:$ 875.00
Add To Cart

Back To Top

Tri-Bed Deionizer Business Model

Tri-Bed Deionizer Business Model
Click to view larger image

This 3-stage unit will provide high quality DI water at the lowest cost per gallon and upwards of 3000 gallons of DI water. Made up of one approximately 1 cubic foot cation tank and two anion tanks, this model will produce 200% more water than the Dual Tank Business model. The Business Model and Ultra Business Model will produce more water than any other deionizer on the market. Built of sturdy fiberglass, this system will give you years of use. Comes complete with the deionizer units, 4' high pressure hose, hand-held TDS meter, shut-off valve, and a cap/plug for the inlet/outlet.

Part Number:OTG2-TDIL
Design:Tri-Bed System
Size:48" x 6.75" each
Weight:52 lbs each
Capacity:0.90 cubic feet
Tank:Tri-Tank
*Rinses:Approximate # of rinses before refilling, assuming TDS of 250 PPM: Car - 685; RV Class A - 115
View our capability table for more information
Warranty:1 Year Limited Warranty
Meter:Portable TDS Hand-held Meter
FlowRate:Less than 5-6 gallons/minute for best performance & effectiveness
Connector:Polypropylene Cam Lever
MSRP:$ 1,628.00
Discount:$ 1,515.00
Add To Cart

Back To Top

*Rinses

The capacity of deionization systems can be determined roughly by the total dissolved solids (TDS) in the water source. The TDS of the water source will determine the local capacity of your unit and the TDS of the output of our deionizer will indicate when change-out is necessary which can be determined easily and quickly with our hand-held TDS meter provided. The TDS can range from 0 to 1000 PPM. The frequency for refilling is dependent upon the TDS of the water source, flow rate, and the gallons used per application. The effectiveness of the DI process is determined by measuring the resistivity/conductivity of the DI water many times illustrated in parts-per-million (PPM). Water quality from deionizers varies with the type of resin, feed water quality, flow, efficiency of regeneration, remaining capacity, temperature, etc. View our Capability table for more information.
Back To Top

**NOTE:

Shipping via UPS Ground to anywhere in the continental United States. If you require priority shipping, special handling, or international shipping, please contact us by email or phone by calling toll-free 1-866-482-9614.
Back To Top